---
title: "Troubleshooting & Incident Resolution"
id: "26710"
type: "page"
slug: "network-troubleshooting-incident-resolution"
published_at: "2026-09-07T01:21:41+00:00"
modified_at: "2026-10-16T19:48:53+00:00"
url: "https://ipfabric.io/network-troubleshooting-incident-resolution/"
markdown_url: "https://ipfabric.io/network-troubleshooting-incident-resolution.md"
---

# Troubleshooting & Incident Resolution

Slash MTTR from several days to just minutes.

[Contact Us](https://ipfabric.io/company/contact/)
[Self-Guided Demo](https://ipfabric.io/ip-fabric-guided-demo/)

[Transcript](#side-by-side-block_04e9df1e496c4e6bc0b10dfa2a77c795-transcript)
Transcript: Troubleshooting & Incident Resolution

When something is not reachable in the  
 network, the first question is always  
 where the path is actually broken. And  
 here is where IP fabric end to end path  
 can support the analysis. I enter here  
 the source IP and the destination IP  
 where I know the problem exists and IP  
 fabric draw the exact path hop by hop  
 including the information about routing  
 decision about ACL load balancing for  
 every device it touch no need to access  
 via console no need to run in thrice  
 root to check what is the correct part  
 but the real power is comparing that to  
 what I had before  
 IP fabric take a full snapshot of the  
 network automatically. So I can rewind  
 to right before the incident and run the  
 exact same pat look up and instantly see  
 what is the difference.  
 Do I have the same rule set? Do I have  
 the same routting table? the same  
 interface configuration or even I can  
 swap here to the compare view and see  
 what is changed in the configuration of  
 the device. I have the diff between the  
 two snapshot that show exactly what it  
 moved in my configuration. Maybe a newcl  
 policy, a route that disappear or a  
 complete new config pushed just before  
 the incident.  
 And that’s help to identify the root  
 cause without grapping logs across all  
 the devices.

## Spending More Time Searching Than Solving?

Diagnose & remediate incidents in record time by querying IP Fabric’s application-aware model of cloud and network behavior.

> Even occasional issues… can impact service quality. By creating dedicated intent checks, we can identify these conditions early and resolve them quickly.

Mirko Gradillo

Network Architect

@ Aeroporti di Roma

[Read Customer Story](https://ipfabric.io/resource/aeroporti-di-roma-adr/)

## Accelerate Root Cause Analysis

Pinpoint the exact cause of a blocked path by:

- Mapping application dependencies to network, cloud & host-level controls.
- Correlating SD-WAN underlay & overlay topologies.
- Checking NTP synchronization across devices.
- Pulling anomalies in BGP routing tables.
- And [more](https://ipfabric.io/unlock-aiops-with-ip-fabric-enterprise-mcp-server/) .

## Evaluate The Impact From End to End

Trace end-to-end paths from on-prem and cloud environments to critical applications. Analyze these paths to:

- Determine the blast radius of an incident.
- Map the impact to applications & critical services.
- Identify any bypassed controls or exposures.
- Spot security & regulatory drift.

## Automate Incident Reporting

Compare historical snapshots before, during, and after the incident to:

- Verify that any changes were implemented as intended.
- Validate that security & regulatory controls are in place.
- Provide timestamped evidence of compliance during every phase of the incident.

## Resources

Demo Video

### Detect Shadow Rules With IP Fabric’s MCP Server

Surface all shadow rules across every device and policy. Get a structured PDF report with deterministic insights.

[Watch Now](https://ipfabric.io/resource/detect-shadow-rules-with-ip-fabrics-mcp-server/)

Downloadable

### MCP Server Guide & Prompt Library

Get 10 expert-tested prompts to detect compliance drift, accelerate troubleshooting, and more.

[Read Now](https://ipfabric.io/unlock-aiops-with-ip-fabric-enterprise-mcp-server/)

Compliance Hub

### Map Security & Regulatory Controls To Your Network

Explore how IP Fabric supports key controls across NIST, CIS, ISO 27001, PCI DSS, HIPAA, DORA, and NIS2.

[Read Now](https://ipfabric.io/compliance-hub/)

## FAQs

Can I Run Partial Snapshots?  Yes, IP Fabric can run partial snapshots of any part of your environment in minutes.

Can I Compare Historical Snapshots?  Yes. Every snapshot is a timestamped record of your cloud and network behavior at that moment in time. Compare any two snapshots to see exactly which devices, configurations, or paths changed between them. These snapshots also double as a reliable reference for [rollbacks](https://ipfabric.io/network-planning-change-management/)
.

Can I Share IP Fabric’s Insights With Other Teams?   Yes. IP Fabric makes it easy to share network insights with any team via [GUI, API, and MCP server](https://ipfabric.io/network-ecosystem-and-extensibility/)
. All of IP Fabric’s network insights are vendor-neutral, so every team can stay on the same page during an incident. IP Fabric also does not charge by the seat, so you can share insights with any team, tool, or AI agent that needs them.

How Does IP Fabric Automate Troubleshooting?  IP Fabric automates troubleshooting in three key ways:

1. Taking snapshots of every device and dependency across network, cloud, and host layers.
2. Mapping end-to-end paths from on-prem and cloud environments to critical applications.
3. Sending webhooks to external tools, and populating [ITSM tickets](https://ipfabric.io/blog/cmdb-health-ip-fabric-servicenow-integration/) with deterministic insights.

All of IP Fabric’s insights are accessible through natural language queries via the [MCP server](https://ipfabric.io/get-a-demo-of-ip-fabric-enterprise-mcp-server/)
. AI agents can also easily access this MCP server to inform their troubleshooting workflows.

Does IP Fabric Replace My Monitoring / Observability Tool?  Monitoring tools tell you what your network is doing right now, and [observability tools](https://ipfabric.io/blog/observability-tool-with-infrastructure-assurance/)
 tell you why your network is behaving the way it is. Network digital twin tools like IP Fabric tell you if your network is behaving the way you intend it to, surfacing any places where it doesn’t and giving you deterministic insights to guide remediation.

## See IP Fabric in Action

Our expert team is here to help you get started.

[Contact Us](https://ipfabric.io/company/contact/)
[Self-Guided Demo](https://ipfabric.io/ip-fabric-guided-demo/)
