Are you affected by CVE-2024-3400?

As more organisations adapt their working practices to cope with an unpredictable office situation, so wireless networking becomes ever more important to allow access to networked services. Pervasive mobility is the name of the game with hot-desking and working from home being the requirements for more people than ever before. And so how do you maximise service availability for users when they are in the office?

How does wireless go wrong?

Forgive me for stating the obvious but wireless networking is not the same as wired. Due to the way that wifi works, your connectivity is much more likely to be affected by transient issues like localised electromagnetic interference, contention or even weather conditions! And so we need to consider a different set of problems when troubleshooting wireless connectivity.

The majority of wifi connectivity problems are typically down to client issues, either location, proximity or roaming. The simplest way to resolve these is - yes, you guessed it, to turn it off and back on again! The science behind that is simple enough - if you are in a good position for wifi signal, turning your wireless adapter off then on will allow it to renegotiate with the nearest wifi access point on the network you're looking to connect to.

But if that doesn't fix your issue, how can your network support team help?

Troubleshooting wireless

First things first, you need to scope the issue to determine how widespread the issue might be. Is it a problem with only accessing a particular application, the internal network, or the Internet? Is your neighbour having the same problem, everybody on your floor, or all users in the building? This allows you to understand whether or not the issue might be localised to a particular Access Point (AP), group of APs or controller, or indeed nothing at all to do with the wireless infrastructure!

If the problem is localised in any way, you'll need to look into - amongst other things:

Collating all of that information is going to be difficult and long-winded: information needs to be gathered, collated and analysed from the wireless clients themselves, the APs, controllers, and the wired network.

And you'll need to be able to determine whether the situation in any of these areas has changed over time as wireless connectivity issues are notoriously transient.

How can IP Fabric help?

When it captures a snapshot of the network, IP Fabric harvests thousands of data points from every network device it connects to, regardless of vendor or platform. It then builds a database of relationships and connections between those devices and the endpoints connected to them. In this way it gives deep visibility and insight into the operation of the network.

In the case of wireless networks, it captures as much information as is available about:

The platform also collects detailed information about forwarding and policy through the wired network and so can give a full picture of connectivity for wireless clients connecting to network services. And of course, with regular snapshots, we are able to compare state over time.

The most effective way of using IP Fabric to troubleshoot issues in the wireless network is to carry out and end-to-end path simulation from wireless client to service.

image 4
End to end path with wireless client

In this example, IP Fabric has identified that the wireless client is connected to the specific AP on the Testing SSID. The AP is connected on VLAN 109 to the switch stack, and builds a tunnel over the management interface to the Wireless LAN Controller. The SSID is then mapped to VLAN 101 for the client to reach its default gateway. Traffic from the client is then routed over the transit network to site 31 where the target endpoint is connected.

As IP Fabric is collecting state data from all of the devices in that path, we are able to evaluate where errors and issues may impact the path. By overlaying intent validation rules we can view the status directly in the map.

image 5
Overlaid intent validation rules

And by clicking through on devices which are shown in a colour other than grey, we are able to identify whether issues identified in the validation rules are impacting the operation of that device.

image 8

For example in this case, the wireless client has a slightly lower signal strength than expected.

image 7

So you can see that IP Fabric can point you towards issues very quickly and simply by using the end-to-end path check to highlight relevant config and state, wired or wireless.

If you have found this article helpful, please follow our company’s LinkedIn or Blog, where more content will be emerging. If you would like to test our solution to see for yourself how IP Fabric can help you manage your network more effectively, please contact us through

We're Hiring!
Join the Team and be part of the Future of Network Automation
Available Positions
98 North Washington Street
Suite 407
Boston, MA 02114
United States
This is a block of text. Double-click this text to edit it.
Phone : +1 617-821-3639
IP Fabric s.r.o.
Kateřinská 466/40
Praha 2 - Nové Město, 120 00
Czech Republic
This is a block of text. Double-click this text to edit it.
Phone : +420 720 022 997
IP Fabric UK Limited
Gateley Legal, 1 Paternoster Square, London,
England EC4M 7DX
This is a block of text. Double-click this text to edit it.
Phone : +420 720 022 997
IP Fabric, Inc. © 2024 All Rights Reserved